Clive Barker's Hellraiser: Revival
To run Clive Barker's Hellraiser: Revival (2026) on PC you need at least a CPU Ryzen 3 1200, Core i5-4690 processor and a GTX 1660; RX Vega 64, with 8GB of RAM and 50GB of free storage. For higher settings and frame rates, the recommended specs are a CPU Ryzen 5 1500X, Core i5-6600 and a RTX 3070; RX 6700 XT with 16GB of RAM. Check your exact PC against Clive Barker's Hellraiser: Revival with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Clive Barker's Hellraiser: Revival.
System Requirements
Minimum
- CPU: CPU Ryzen 3 1200, Core i5-4690
- GPU: GTX 1660; RX Vega 64
- RAM: 8
- Storage: 50
Recommended
- CPU: CPU Ryzen 5 1500X, Core i5-6600
- GPU: RTX 3070; RX 6700 XT
- RAM: 16
- Storage: 50
Building a PC to play Clive Barker's Hellraiser: Revival at its best
Meeting the Clive Barker's Hellraiser: Revival minimum requirements (a GTX 1660; RX Vega 64) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended RTX 3070; RX 6700 XT is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Clive Barker's Hellraiser: Revival's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Clive Barker's Hellraiser: Revival back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Clive Barker's Hellraiser: Revival with the free Can I Run It tool, or see the best GPU for Clive Barker's Hellraiser: Revival.
Clive Barker's Hellraiser: Revival — Frequently Asked Questions
What are the minimum requirements for Clive Barker's Hellraiser: Revival?
Clive Barker's Hellraiser: Revival needs at least a CPU Ryzen 3 1200, Core i5-4690 CPU and a GTX 1660; RX Vega 64 graphics card, 8GB of RAM and 50GB of storage.
What are the recommended specs for Clive Barker's Hellraiser: Revival?
For a smooth experience, Clive Barker's Hellraiser: Revival recommends a CPU Ryzen 5 1500X, Core i5-6600 and a RTX 3070; RX 6700 XT with 16GB of RAM.
How much RAM does Clive Barker's Hellraiser: Revival need?
Clive Barker's Hellraiser: Revival requires 8GB of RAM as a minimum, with 16GB recommended.
What GPU do you need to run Clive Barker's Hellraiser: Revival?
The minimum graphics card for Clive Barker's Hellraiser: Revival is a GTX 1660; RX Vega 64, while a RTX 3070; RX 6700 XT is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
