Construction Simulator 2015
To run Construction Simulator 2015 (2014) on PC you need at least a Dual-Core Processor with 2.4 GHz processor and a DirectX 9 compatible graphics card with 1 GB VRAM (Geforce 460 or better | ATI Radeon HD 57xx or better), with 4GB of RAM and 50GB of free storage. For higher settings and frame rates, the recommended specs are a Dual or Quad-Core Processor with 3 GHz or better recommended and a DirectX 9 compatible graphics card with 2 GB+ RAM (Geforce GTX 660 or better | ATI Radeon HD 68xx, 77xx or better) with 4GB of RAM. Check your exact PC against Construction Simulator 2015 with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Construction Simulator 2015.
System Requirements
Minimum
- CPU: Dual-Core Processor with 2.4 GHz
- GPU: DirectX 9 compatible graphics card with 1 GB VRAM (Geforce 460 or better | ATI Radeon HD 57xx or better)
- RAM: 4
- Storage: 50
Recommended
- CPU: Dual or Quad-Core Processor with 3 GHz or better recommended
- GPU: DirectX 9 compatible graphics card with 2 GB+ RAM (Geforce GTX 660 or better | ATI Radeon HD 68xx, 77xx or better)
- RAM: 4
- Storage: 50
Building a PC to play Construction Simulator 2015 at its best
Meeting the Construction Simulator 2015 minimum requirements (a DirectX 9 compatible graphics card with 1 GB VRAM (Geforce 460 or better | ATI Radeon HD 57xx or better)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended DirectX 9 compatible graphics card with 2 GB+ RAM (Geforce GTX 660 or better | ATI Radeon HD 68xx, 77xx or better) is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Construction Simulator 2015's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 4GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Construction Simulator 2015 back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Construction Simulator 2015 with the free Can I Run It tool, or see the best GPU for Construction Simulator 2015.
Construction Simulator 2015 — Frequently Asked Questions
What are the minimum requirements for Construction Simulator 2015?
Construction Simulator 2015 needs at least a Dual-Core Processor with 2.4 GHz CPU and a DirectX 9 compatible graphics card with 1 GB VRAM (Geforce 460 or better | ATI Radeon HD 57xx or better) graphics card, 4GB of RAM and 50GB of storage.
What are the recommended specs for Construction Simulator 2015?
For a smooth experience, Construction Simulator 2015 recommends a Dual or Quad-Core Processor with 3 GHz or better recommended and a DirectX 9 compatible graphics card with 2 GB+ RAM (Geforce GTX 660 or better | ATI Radeon HD 68xx, 77xx or better) with 4GB of RAM.
How much RAM does Construction Simulator 2015 need?
Construction Simulator 2015 requires 4GB of RAM as a minimum, with 4GB recommended.
What GPU do you need to run Construction Simulator 2015?
The minimum graphics card for Construction Simulator 2015 is a DirectX 9 compatible graphics card with 1 GB VRAM (Geforce 460 or better | ATI Radeon HD 57xx or better), while a DirectX 9 compatible graphics card with 2 GB+ RAM (Geforce GTX 660 or better | ATI Radeon HD 68xx, 77xx or better) is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
