Copycat

Copycat

By Luigi R. Updated: June 2026

To run Copycat (2024) on PC you need at least a Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz) processor and a GeForce GTX 1650 / AMD Radeon RX 5500 XT (4 GB VRAM), with 8GB of RAM and 18GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz) and a GeForce RTX 2080 / AMD Radeon RX 5700 XT (8 GB VRAM) with 16GB of RAM. Check your exact PC against Copycat with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Copycat.

System Requirements

Minimum
  • CPU: Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz)
  • GPU: GeForce GTX 1650 / AMD Radeon RX 5500 XT (4 GB VRAM)
  • RAM: 8
  • Storage: 18
Recommended
  • CPU: Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz)
  • GPU: GeForce RTX 2080 / AMD Radeon RX 5700 XT (8 GB VRAM)
  • RAM: 16
  • Storage: 20

Building a PC to play Copycat at its best

Meeting the Copycat minimum requirements (a GeForce GTX 1650 / AMD Radeon RX 5500 XT (4 GB VRAM)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended GeForce RTX 2080 / AMD Radeon RX 5700 XT (8 GB VRAM) is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Copycat's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.

The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Copycat back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.

The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Copycat with the free Can I Run It tool, or see the best GPU for Copycat.

Copycat — Frequently Asked Questions

What are the minimum requirements for Copycat?
Copycat needs at least a Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz) CPU and a GeForce GTX 1650 / AMD Radeon RX 5500 XT (4 GB VRAM) graphics card, 8GB of RAM and 18GB of storage.

What are the recommended specs for Copycat?
For a smooth experience, Copycat recommends a Intel Core i5-4690K (3.5 GHz) / AMD FX-8300 (3.3 GHz) and a GeForce RTX 2080 / AMD Radeon RX 5700 XT (8 GB VRAM) with 16GB of RAM.

How much RAM does Copycat need?
Copycat requires 8GB of RAM as a minimum, with 16GB recommended.

What GPU do you need to run Copycat?
The minimum graphics card for Copycat is a GeForce GTX 1650 / AMD Radeon RX 5500 XT (4 GB VRAM), while a GeForce RTX 2080 / AMD Radeon RX 5700 XT (8 GB VRAM) is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.