Design and Conjure
To run Design and Conjure on PC you need at least a Dual Core 2.5 GHz processor and a NVIDIA GeForce GTX 750 Ti (2GB) / AMD Radeon RX 560, with 6GB of RAM and 5GB of free storage. For higher settings and frame rates, the recommended specs are a Quad Core 3.0 GHz or equivalent and a NVIDIA GeForce GTX 1060 (6GB) / AMD Radeon RX 580 with 8GB of RAM. Check your exact PC against Design and Conjure with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Design and Conjure.
System Requirements
Minimum
- CPU: Dual Core 2.5 GHz
- GPU: NVIDIA GeForce GTX 750 Ti (2GB) / AMD Radeon RX 560
- RAM: 6
- Storage: 5
Recommended
- CPU: Quad Core 3.0 GHz or equivalent
- GPU: NVIDIA GeForce GTX 1060 (6GB) / AMD Radeon RX 580
- RAM: 8
- Storage: 5
Building a PC to play Design and Conjure at its best
Meeting the Design and Conjure minimum requirements (a NVIDIA GeForce GTX 750 Ti (2GB) / AMD Radeon RX 560) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended NVIDIA GeForce GTX 1060 (6GB) / AMD Radeon RX 580 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Design and Conjure's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 8GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Design and Conjure back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Design and Conjure with the free Can I Run It tool, or see the best GPU for Design and Conjure.
Design and Conjure — Frequently Asked Questions
What are the minimum requirements for Design and Conjure?
Design and Conjure needs at least a Dual Core 2.5 GHz CPU and a NVIDIA GeForce GTX 750 Ti (2GB) / AMD Radeon RX 560 graphics card, 6GB of RAM and 5GB of storage.
What are the recommended specs for Design and Conjure?
For a smooth experience, Design and Conjure recommends a Quad Core 3.0 GHz or equivalent and a NVIDIA GeForce GTX 1060 (6GB) / AMD Radeon RX 580 with 8GB of RAM.
How much RAM does Design and Conjure need?
Design and Conjure requires 6GB of RAM as a minimum, with 8GB recommended.
What GPU do you need to run Design and Conjure?
The minimum graphics card for Design and Conjure is a NVIDIA GeForce GTX 750 Ti (2GB) / AMD Radeon RX 560, while a NVIDIA GeForce GTX 1060 (6GB) / AMD Radeon RX 580 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
