LEGO® Star Wars™ III - The Clone Wars™
To run LEGO® Star Wars™ III - The Clone Wars™ (2011) on PC you need at least a Intel P4 2.24 GHz or AMD Athlon 64 processor and a 256 MB Video Memory with Shader 3.0 support; ATI Radeon X1300 / NVIDIA GeForce FX 5800 /Intel GMA 3-Series, with 1GB of RAM and 8GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core 2 Duo or AMD Athlon 64 X2 and a 256 MB Video Memory with Shader 3.0 support; ATI Radeon HD 2900 / NVIDIA GeForce 9800 with 16GB of RAM. Check your exact PC against LEGO® Star Wars™ III - The Clone Wars™ with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for LEGO® Star Wars™ III - The Clone Wars™.
System Requirements
Minimum
- CPU: Intel P4 2.24 GHz or AMD Athlon 64
- GPU: 256 MB Video Memory with Shader 3.0 support; ATI Radeon X1300 / NVIDIA GeForce FX 5800 /Intel GMA 3-Series
- RAM: 1
- Storage: 8
Recommended
- CPU: Intel Core 2 Duo or AMD Athlon 64 X2
- GPU: 256 MB Video Memory with Shader 3.0 support; ATI Radeon HD 2900 / NVIDIA GeForce 9800
- RAM: 16
- Storage: 50
Building a PC to play LEGO® Star Wars™ III - The Clone Wars™ at its best
Meeting the LEGO® Star Wars™ III - The Clone Wars™ minimum requirements (a 256 MB Video Memory with Shader 3.0 support; ATI Radeon X1300 / NVIDIA GeForce FX 5800 /Intel GMA 3-Series) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended 256 MB Video Memory with Shader 3.0 support; ATI Radeon HD 2900 / NVIDIA GeForce 9800 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift LEGO® Star Wars™ III - The Clone Wars™'s frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold LEGO® Star Wars™ III - The Clone Wars™ back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against LEGO® Star Wars™ III - The Clone Wars™ with the free Can I Run It tool, or see the best GPU for LEGO® Star Wars™ III - The Clone Wars™.
LEGO® Star Wars™ III - The Clone Wars™ — Frequently Asked Questions
What are the minimum requirements for LEGO® Star Wars™ III - The Clone Wars™?
LEGO® Star Wars™ III - The Clone Wars™ needs at least a Intel P4 2.24 GHz or AMD Athlon 64 CPU and a 256 MB Video Memory with Shader 3.0 support; ATI Radeon X1300 / NVIDIA GeForce FX 5800 /Intel GMA 3-Series graphics card, 1GB of RAM and 8GB of storage.
What are the recommended specs for LEGO® Star Wars™ III - The Clone Wars™?
For a smooth experience, LEGO® Star Wars™ III - The Clone Wars™ recommends a Intel Core 2 Duo or AMD Athlon 64 X2 and a 256 MB Video Memory with Shader 3.0 support; ATI Radeon HD 2900 / NVIDIA GeForce 9800 with 16GB of RAM.
How much RAM does LEGO® Star Wars™ III - The Clone Wars™ need?
LEGO® Star Wars™ III - The Clone Wars™ requires 1GB of RAM as a minimum, with 16GB recommended.
What GPU do you need to run LEGO® Star Wars™ III - The Clone Wars™?
The minimum graphics card for LEGO® Star Wars™ III - The Clone Wars™ is a 256 MB Video Memory with Shader 3.0 support; ATI Radeon X1300 / NVIDIA GeForce FX 5800 /Intel GMA 3-Series, while a 256 MB Video Memory with Shader 3.0 support; ATI Radeon HD 2900 / NVIDIA GeForce 9800 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
