LEGO® STAR WARS™: The Force Awakens
To run LEGO® STAR WARS™: The Force Awakens (2016) on PC you need at least a Intel Core 2 Quad Q6600 (2.4 GHz) / AMD Phenom x4 9850 (2.5 GHz) processor and a GeForce GT 430 (1024 MB)/ Radeon HD 6850 (1024 MB), with 4GB of RAM and 14GB of free storage. For higher settings and frame rates, the recommended specs are a Intel i5, 4 x 2.6 GHz or AMD equivalent and a NVIDIA GeForce GTX 480 or ATI Radeon HD 5850 or better, 1Gb RAM with 4GB of RAM. Check your exact PC against LEGO® STAR WARS™: The Force Awakens with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for LEGO® STAR WARS™: The Force Awakens.
System Requirements
Minimum
- CPU: Intel Core 2 Quad Q6600 (2.4 GHz) / AMD Phenom x4 9850 (2.5 GHz)
- GPU: GeForce GT 430 (1024 MB)/ Radeon HD 6850 (1024 MB)
- RAM: 4
- Storage: 14
Recommended
- CPU: Intel i5, 4 x 2.6 GHz or AMD equivalent
- GPU: NVIDIA GeForce GTX 480 or ATI Radeon HD 5850 or better, 1Gb RAM
- RAM: 4
- Storage: 14
Building a PC to play LEGO® STAR WARS™: The Force Awakens at its best
Meeting the LEGO® STAR WARS™: The Force Awakens minimum requirements (a GeForce GT 430 (1024 MB)/ Radeon HD 6850 (1024 MB)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended NVIDIA GeForce GTX 480 or ATI Radeon HD 5850 or better, 1Gb RAM is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift LEGO® STAR WARS™: The Force Awakens's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 4GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold LEGO® STAR WARS™: The Force Awakens back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against LEGO® STAR WARS™: The Force Awakens with the free Can I Run It tool, or see the best GPU for LEGO® STAR WARS™: The Force Awakens.
LEGO® STAR WARS™: The Force Awakens — Frequently Asked Questions
What are the minimum requirements for LEGO® STAR WARS™: The Force Awakens?
LEGO® STAR WARS™: The Force Awakens needs at least a Intel Core 2 Quad Q6600 (2.4 GHz) / AMD Phenom x4 9850 (2.5 GHz) CPU and a GeForce GT 430 (1024 MB)/ Radeon HD 6850 (1024 MB) graphics card, 4GB of RAM and 14GB of storage.
What are the recommended specs for LEGO® STAR WARS™: The Force Awakens?
For a smooth experience, LEGO® STAR WARS™: The Force Awakens recommends a Intel i5, 4 x 2.6 GHz or AMD equivalent and a NVIDIA GeForce GTX 480 or ATI Radeon HD 5850 or better, 1Gb RAM with 4GB of RAM.
How much RAM does LEGO® STAR WARS™: The Force Awakens need?
LEGO® STAR WARS™: The Force Awakens requires 4GB of RAM as a minimum, with 4GB recommended.
What GPU do you need to run LEGO® STAR WARS™: The Force Awakens?
The minimum graphics card for LEGO® STAR WARS™: The Force Awakens is a GeForce GT 430 (1024 MB)/ Radeon HD 6850 (1024 MB), while a NVIDIA GeForce GTX 480 or ATI Radeon HD 5850 or better, 1Gb RAM is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
