NoLimits 2 Roller Coaster Simulation
To run NoLimits 2 Roller Coaster Simulation (2014) on PC you need at least a 2.4 GHz Dual Core processor and a DirectX 10.0 hardware required (>= Shader Model 3), min 512 MB VRAM, older DX9 cards (ATI x1000 series, GF 7000 series or older) not supported, with 4GB of RAM and 2GB of free storage. For higher settings and frame rates, the recommended specs are a 3.2 GHz Quad Core and a DirectX 11 hardware or newer (>= Shader Model 5) and with 1 GB or more VRAM with 8GB of RAM. Check your exact PC against NoLimits 2 Roller Coaster Simulation with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for NoLimits 2 Roller Coaster Simulation.
System Requirements
Minimum
- CPU: 2.4 GHz Dual Core
- GPU: DirectX 10.0 hardware required (>= Shader Model 3), min 512 MB VRAM, older DX9 cards (ATI x1000 series, GF 7000 series or older) not supported
- RAM: 4
- Storage: 2
Recommended
- CPU: 3.2 GHz Quad Core
- GPU: DirectX 11 hardware or newer (>= Shader Model 5) and with 1 GB or more VRAM
- RAM: 8
- Storage: 2
Building a PC to play NoLimits 2 Roller Coaster Simulation at its best
Meeting the NoLimits 2 Roller Coaster Simulation minimum requirements (a DirectX 10.0 hardware required (>= Shader Model 3), min 512 MB VRAM, older DX9 cards (ATI x1000 series, GF 7000 series or older) not supported) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended DirectX 11 hardware or newer (>= Shader Model 5) and with 1 GB or more VRAM is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift NoLimits 2 Roller Coaster Simulation's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 8GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold NoLimits 2 Roller Coaster Simulation back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against NoLimits 2 Roller Coaster Simulation with the free Can I Run It tool, or see the best GPU for NoLimits 2 Roller Coaster Simulation.
NoLimits 2 Roller Coaster Simulation — Frequently Asked Questions
What are the minimum requirements for NoLimits 2 Roller Coaster Simulation?
NoLimits 2 Roller Coaster Simulation needs at least a 2.4 GHz Dual Core CPU and a DirectX 10.0 hardware required (>= Shader Model 3), min 512 MB VRAM, older DX9 cards (ATI x1000 series, GF 7000 series or older) not supported graphics card, 4GB of RAM and 2GB of storage.
What are the recommended specs for NoLimits 2 Roller Coaster Simulation?
For a smooth experience, NoLimits 2 Roller Coaster Simulation recommends a 3.2 GHz Quad Core and a DirectX 11 hardware or newer (>= Shader Model 5) and with 1 GB or more VRAM with 8GB of RAM.
How much RAM does NoLimits 2 Roller Coaster Simulation need?
NoLimits 2 Roller Coaster Simulation requires 4GB of RAM as a minimum, with 8GB recommended.
What GPU do you need to run NoLimits 2 Roller Coaster Simulation?
The minimum graphics card for NoLimits 2 Roller Coaster Simulation is a DirectX 10.0 hardware required (>= Shader Model 3), min 512 MB VRAM, older DX9 cards (ATI x1000 series, GF 7000 series or older) not supported, while a DirectX 11 hardware or newer (>= Shader Model 5) and with 1 GB or more VRAM is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
