Prince of Persia®: The Sands of Time
To run Prince of Persia®: The Sands of Time (2009) on PC you need at least a 800 MHz Pentium® III or AMD Athlon™ processor and a 64 MB GeForce™ 3 or higher, or ATI® Radeon™ 8500 or higher, Matrox Parhelia™. (GeForce4 MX not supported), with 1GB of RAM and 50GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i5 and a NVIDIA GeForce GTX 1060 with 16GB of RAM. Check your exact PC against Prince of Persia®: The Sands of Time with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Prince of Persia®: The Sands of Time.
System Requirements
Minimum
- CPU: 800 MHz Pentium® III or AMD Athlon™
- GPU: 64 MB GeForce™ 3 or higher, or ATI® Radeon™ 8500 or higher, Matrox Parhelia™. (GeForce4 MX not supported)
- RAM: 1
- Storage: 50
Recommended
- CPU: Intel Core i5
- GPU: NVIDIA GeForce GTX 1060
- RAM: 16
- Storage: 50
Building a PC to play Prince of Persia®: The Sands of Time at its best
Meeting the Prince of Persia®: The Sands of Time minimum requirements (a 64 MB GeForce™ 3 or higher, or ATI® Radeon™ 8500 or higher, Matrox Parhelia™. (GeForce4 MX not supported)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended NVIDIA GeForce GTX 1060 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Prince of Persia®: The Sands of Time's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Prince of Persia®: The Sands of Time back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Prince of Persia®: The Sands of Time with the free Can I Run It tool, or see the best GPU for Prince of Persia®: The Sands of Time.
Prince of Persia®: The Sands of Time — Frequently Asked Questions
What are the minimum requirements for Prince of Persia®: The Sands of Time?
Prince of Persia®: The Sands of Time needs at least a 800 MHz Pentium® III or AMD Athlon™ CPU and a 64 MB GeForce™ 3 or higher, or ATI® Radeon™ 8500 or higher, Matrox Parhelia™. (GeForce4 MX not supported) graphics card, 1GB of RAM and 50GB of storage.
What are the recommended specs for Prince of Persia®: The Sands of Time?
For a smooth experience, Prince of Persia®: The Sands of Time recommends a Intel Core i5 and a NVIDIA GeForce GTX 1060 with 16GB of RAM.
How much RAM does Prince of Persia®: The Sands of Time need?
Prince of Persia®: The Sands of Time requires 1GB of RAM as a minimum, with 16GB recommended.
What GPU do you need to run Prince of Persia®: The Sands of Time?
The minimum graphics card for Prince of Persia®: The Sands of Time is a 64 MB GeForce™ 3 or higher, or ATI® Radeon™ 8500 or higher, Matrox Parhelia™. (GeForce4 MX not supported), while a NVIDIA GeForce GTX 1060 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
