Rome: Total War™ - Alexander
To run Rome: Total War™ - Alexander (2007) on PC you need at least a or higher, 256MB RAM , 2.9GB of uncompressed free hard disk space (plus 500MB for Windows swap file), 100% DirectX® 9.0c compatible 16-bit sound card processor and a with Shader 1 support and the latest drivers. Must be 100% DirectX® 9.0b compatible, 1024 x 768, Internet (TCP / IP) play supported; Internet play req, with 8GB of RAM and 50GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i5 and a NVIDIA GeForce GTX 1060 with 16GB of RAM. Check your exact PC against Rome: Total War™ - Alexander with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Rome: Total War™ - Alexander.
System Requirements
Minimum
- CPU: or higher, 256MB RAM , 2.9GB of uncompressed free hard disk space (plus 500MB for Windows swap file), 100% DirectX® 9.0c compatible 16-bit sound card
- GPU: with Shader 1 support and the latest drivers. Must be 100% DirectX® 9.0b compatible, 1024 x 768, Internet (TCP / IP) play supported; Internet play req
- RAM: 8
- Storage: 50
Recommended
- CPU: Intel Core i5
- GPU: NVIDIA GeForce GTX 1060
- RAM: 16
- Storage: 50
Building a PC to play Rome: Total War™ - Alexander at its best
Meeting the Rome: Total War™ - Alexander minimum requirements (a with Shader 1 support and the latest drivers. Must be 100% DirectX® 9.0b compatible, 1024 x 768, Internet (TCP / IP) play supported; Internet play req) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended NVIDIA GeForce GTX 1060 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Rome: Total War™ - Alexander's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Rome: Total War™ - Alexander back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Rome: Total War™ - Alexander with the free Can I Run It tool, or see the best GPU for Rome: Total War™ - Alexander.
Rome: Total War™ - Alexander — Frequently Asked Questions
What are the minimum requirements for Rome: Total War™ - Alexander?
Rome: Total War™ - Alexander needs at least a or higher, 256MB RAM , 2.9GB of uncompressed free hard disk space (plus 500MB for Windows swap file), 100% DirectX® 9.0c compatible 16-bit sound card CPU and a with Shader 1 support and the latest drivers. Must be 100% DirectX® 9.0b compatible, 1024 x 768, Internet (TCP / IP) play supported; Internet play req graphics card, 8GB of RAM and 50GB of storage.
What are the recommended specs for Rome: Total War™ - Alexander?
For a smooth experience, Rome: Total War™ - Alexander recommends a Intel Core i5 and a NVIDIA GeForce GTX 1060 with 16GB of RAM.
How much RAM does Rome: Total War™ - Alexander need?
Rome: Total War™ - Alexander requires 8GB of RAM as a minimum, with 16GB recommended.
What GPU do you need to run Rome: Total War™ - Alexander?
The minimum graphics card for Rome: Total War™ - Alexander is a with Shader 1 support and the latest drivers. Must be 100% DirectX® 9.0b compatible, 1024 x 768, Internet (TCP / IP) play supported; Internet play req, while a NVIDIA GeForce GTX 1060 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
