Stormworks: Build and Rescue
To run Stormworks: Build and Rescue (2020) on PC you need at least a Intel Core i5-4440 / AMD Ryzen 3 1200 processor and a Intel HD 6000 / GeForce 550 / AMD R7 250 (AMD Radeon HD 7750), with 4GB of RAM and 2GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i7-6700K / Ryzen 7 3700X and a GeForce 750 Ti / AMD RX 550 with 8GB of RAM. Check your exact PC against Stormworks: Build and Rescue with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Stormworks: Build and Rescue.
System Requirements
Minimum
- CPU: Intel Core i5-4440 / AMD Ryzen 3 1200
- GPU: Intel HD 6000 / GeForce 550 / AMD R7 250 (AMD Radeon HD 7750)
- RAM: 4
- Storage: 2
Recommended
- CPU: Intel Core i7-6700K / Ryzen 7 3700X
- GPU: GeForce 750 Ti / AMD RX 550
- RAM: 8
- Storage: 2
Building a PC to play Stormworks: Build and Rescue at its best
Meeting the Stormworks: Build and Rescue minimum requirements (a Intel HD 6000 / GeForce 550 / AMD R7 250 (AMD Radeon HD 7750)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended GeForce 750 Ti / AMD RX 550 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Stormworks: Build and Rescue's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 8GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Stormworks: Build and Rescue back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Stormworks: Build and Rescue with the free Can I Run It tool, or see the best GPU for Stormworks: Build and Rescue.
Stormworks: Build and Rescue — Frequently Asked Questions
What are the minimum requirements for Stormworks: Build and Rescue?
Stormworks: Build and Rescue needs at least a Intel Core i5-4440 / AMD Ryzen 3 1200 CPU and a Intel HD 6000 / GeForce 550 / AMD R7 250 (AMD Radeon HD 7750) graphics card, 4GB of RAM and 2GB of storage.
What are the recommended specs for Stormworks: Build and Rescue?
For a smooth experience, Stormworks: Build and Rescue recommends a Intel Core i7-6700K / Ryzen 7 3700X and a GeForce 750 Ti / AMD RX 550 with 8GB of RAM.
How much RAM does Stormworks: Build and Rescue need?
Stormworks: Build and Rescue requires 4GB of RAM as a minimum, with 8GB recommended.
What GPU do you need to run Stormworks: Build and Rescue?
The minimum graphics card for Stormworks: Build and Rescue is a Intel HD 6000 / GeForce 550 / AMD R7 250 (AMD Radeon HD 7750), while a GeForce 750 Ti / AMD RX 550 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
