Wax Heads
To run Wax Heads (2026) on PC you need at least a Intel Core i5-4670K (4 * 3400) / Radeon RX 550 (4096 MB) processor and a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB), with 4GB of RAM and 2GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i5-4670K (4 * 3400) / AMD FX-8350 (4 * 4000) and a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB) with 8GB of RAM. Check your exact PC against Wax Heads with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Wax Heads.
System Requirements
Minimum
- CPU: Intel Core i5-4670K (4 * 3400) / Radeon RX 550 (4096 MB)
- GPU: GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB)
- RAM: 4
- Storage: 2
Recommended
- CPU: Intel Core i5-4670K (4 * 3400) / AMD FX-8350 (4 * 4000)
- GPU: GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB)
- RAM: 8
- Storage: 50
Building a PC to play Wax Heads at its best
Meeting the Wax Heads minimum requirements (a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB)) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB) is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Wax Heads's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 8GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Wax Heads back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Wax Heads with the free Can I Run It tool, or see the best GPU for Wax Heads.
Wax Heads — Frequently Asked Questions
What are the minimum requirements for Wax Heads?
Wax Heads needs at least a Intel Core i5-4670K (4 * 3400) / Radeon RX 550 (4096 MB) CPU and a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB) graphics card, 4GB of RAM and 2GB of storage.
What are the recommended specs for Wax Heads?
For a smooth experience, Wax Heads recommends a Intel Core i5-4670K (4 * 3400) / AMD FX-8350 (4 * 4000) and a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB) with 8GB of RAM.
How much RAM does Wax Heads need?
Wax Heads requires 4GB of RAM as a minimum, with 8GB recommended.
What GPU do you need to run Wax Heads?
The minimum graphics card for Wax Heads is a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB), while a GeForce GT 1030 (2048 MB) / Radeon RX 550 (4096 MB) is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
