Vampyr
To run Vampyr (2018) on PC you need at least a Intel Core i3-2130 (3.4 GHz)/AMD FX-4100 (3.6 GHz) processor and a 2 GB, GeForce GTX 1050 (Legacy GPU: GeForce GTX 660) / Radeon R7 370, with 8GB of RAM and 20GB of free storage. For higher settings and frame rates, the recommended specs are a Intel Core i7-3930K (3.2 GHz)/AMD Ryzen 5 1600 (3.2 GHz) and a 4 GB, GeForce GeForce GTX 970 / GTX 1060 / Radeon R9 390 with 16GB of RAM. Check your exact PC against Vampyr with our free Can I Run It tool, estimate your frame rate with the FPS Estimator, or see the best GPU for Vampyr.
System Requirements
Minimum
- CPU: Intel Core i3-2130 (3.4 GHz)/AMD FX-4100 (3.6 GHz)
- GPU: 2 GB, GeForce GTX 1050 (Legacy GPU: GeForce GTX 660) / Radeon R7 370
- RAM: 8
- Storage: 20
Recommended
- CPU: Intel Core i7-3930K (3.2 GHz)/AMD Ryzen 5 1600 (3.2 GHz)
- GPU: 4 GB, GeForce GeForce GTX 970 / GTX 1060 / Radeon R9 390
- RAM: 16
- Storage: 20
Building a PC to play Vampyr at its best
Meeting the Vampyr minimum requirements (a 2 GB, GeForce GTX 1050 (Legacy GPU: GeForce GTX 660) / Radeon R7 370) is enough to launch the game, but it won't give you high frame rates at 1440p or 4K. The recommended 4 GB, GeForce GeForce GTX 970 / GTX 1060 / Radeon R9 390 is a solid target, and stepping up to a GeForce RTX 5070 Ti, RTX 5080 or Radeon RX 9070 XT gives you the headroom for ultra settings, ray tracing and high-refresh play. On mid-range cards, DLSS 4 and FSR frame generation can lift Vampyr's frame rate substantially, while a flagship RTX 5090 drives 4K at maximum settings.
The processor matters just as much: pairing your graphics card with a Ryzen 7 9800X3D or an Intel Core Ultra, at least 16GB (ideally 32GB) of DDR5 RAM and a fast Gen5 NVMe SSD removes the stutter and long load times that can hold Vampyr back. For modern textures at 4K, aim for a GPU with 12–16GB of VRAM so you never run short.
The same premium components also decide whether your rig is VR ready: if you game in virtual reality on a Meta Quest 3, Valve Index or PlayStation VR2, a strong GPU and CPU are what hold a steady 90 FPS. Check your exact setup against Vampyr with the free Can I Run It tool, or see the best GPU for Vampyr.
Vampyr — Frequently Asked Questions
What are the minimum requirements for Vampyr?
Vampyr needs at least a Intel Core i3-2130 (3.4 GHz)/AMD FX-4100 (3.6 GHz) CPU and a 2 GB, GeForce GTX 1050 (Legacy GPU: GeForce GTX 660) / Radeon R7 370 graphics card, 8GB of RAM and 20GB of storage.
What are the recommended specs for Vampyr?
For a smooth experience, Vampyr recommends a Intel Core i7-3930K (3.2 GHz)/AMD Ryzen 5 1600 (3.2 GHz) and a 4 GB, GeForce GeForce GTX 970 / GTX 1060 / Radeon R9 390 with 16GB of RAM.
How much RAM does Vampyr need?
Vampyr requires 8GB of RAM as a minimum, with 16GB recommended.
What GPU do you need to run Vampyr?
The minimum graphics card for Vampyr is a 2 GB, GeForce GTX 1050 (Legacy GPU: GeForce GTX 660) / Radeon R7 370, while a 4 GB, GeForce GeForce GTX 970 / GTX 1060 / Radeon R9 390 is recommended for higher settings. Check any GPU against this game with our Can I Run It tool.
